LED Street Light Installation Guide and Maintenance Procedure. Although led street lamp has a long lifespan, it is consumable.If you want to prolong its service life, it should be regularly maintained and kept in good repair. Below are some LED street light installation guides and maintenance procedures …
Note: The base foundation must be parallel on even surface to the main road and ensure the light projection onto the road is correct before installation. 3. If the sample plate cannot be placed onto the four poles, then the base frame of the poles is either damaged or deformed.
The cost of installing a solar street light is cheaper than the cost of installation and earthwork needed to construct a grid-connected street light from the nearest power location. Solar street lights are a great way to light up a home or neighborhood for nighttime safety.
process of installation, the street lights must be carefully protected. In the case of street light face faces the ground, it must be protected with soft cloth or other protective materials. 3. Any installation mustn't be proceeded unless all the powers are off. 4.
Installation Instructions for LED Solar Street Lights - Solar Powered Street Lights. A. The Installation of Solar Panels. The Installation of Solar Panels. Install the anti-skid, unloaded the lamp pole, and install the bracket on the solar panel, adjust the solar panel's direction and angle, then tight the screw at last.
SOLAR POWERED LIGHT INSTRUCTIONS (FOR TELESCOPING FLAGPOLES) Model No. PL2 'iIw.ays Keep Instructions for Future Reference" Patent Pending How solar light works Solar Powered Light must be installed outdoors with its solar panel receiving DIRECT sunlight. The built-in solar …
INTRODUCTION 1.1 The scope of the guideline is inclusive of all roadway illumination equipment on public Rights of Way, including lighting on traffic signal poles. The equipment consists of poles, …
read the following instructions for solar lights carefully before installation. Installation Guide: O o 9 ... to irradiance or peak sun hours for the location of the installation In areas that are short of ... Solar street light User Manual V2.4
Read the installation manual and familiarize yourself with the installation procedures, the circuit diagrams, and the safety measures you must take before you proceed with the installation. 3. Make sure that you have the complete solar street lights kit .
Installation Procedures of Solar Street Lamp 1. Installation of Basement The four screws are bared on the ground for 60mm and locate level position. The line of two screws should be paralleled to the edge of the road and should not be incline and deflection.